Household Batteries, Chargers & Accessories RDBSMGX 3-20s Ternary Lithium Battery Protection Board 300a-500a Battery Charger with Fan 1a Active Equalizer with 18awg Row Cable Bluetooth Ntc

RDBSMGX 3-20s Ternary Lithium Battery Protection Board 300a-500a Battery Charger with Fan 1a Active Equalizer with 18awg Row Cable Bluetooth Ntc

0 Comments



Price: $367.00
(as of Apr 01,2023 04:48:23 UTC – Details)



NTC is small in size, fast in response, and can work stably for a long time.

Product name: Ternary lithium battery protection board
Product installation.
1, the row of wires from the thin black wire connected to the total negative B, the second wire (red wire) connected to the first string of positive battery, and then connected to each string of positive battery in turn, until the last – string B + the total positive terminal.
2, after the line is connected, the plug do not plug directly into the protection plate, first measure the voltage between each of the two adjacent metal terminals on the back of the plug, if it is a ternary lithium battery, the voltage should be 3.0 ~ 4.15V, lithium iron batteries should be between 2.5 ~ 3.6V, lithium titanate batteries should be between 1.8 ~ 2.8V

Please note.
1. Wires from different manufacturers are not common, please use matching wires.
2. [Size] Due to manual measurement, please allow 1-3 cm/0.39-0.79 inches of measurement error.
3. [Colour] Due to different computers, the product colour may vary slightly from the picture, please note
1: Product parameters: This product is suitable for, 300A-500A ternary lithium battery pack. The type of protection board must be the same as the type of lithium battery. The number of strings of the protection board must be the same as the number of strings of the battery pack.
2: Strong adaptability: easy to assemble, the active equalizer comes with 18AWG cable, accurate voltage collection, easy to plug in the battery pack and BMS, active equalizer. The row wire ends of the active equalizer and BMS can be interchangeably plugged in.
3: Product details: Snap-on cable, easy to plug and unplug, solid and stable, pre-set protection plate, screw positioning holes, simple and clear, easy to assemble, wave-shaped, aluminium alloy heat sink, significantly improve heat dissipation area and efficiency. With fan to accelerate heat dissipation.
4: 1 button activation: the optional Bluetooth has a self resetting button on top, touch the button to activate the protection plate for the third step. (If there is an optional key light board, there is also an activation button on it for this function)
5: Applicable scenarios: Can be applied to power and storage lithium batteries, such as electric cars, electric scooters, electric forklifts, home energy storage, caravans, electric tools, etc.